3P Twinfilter
Article no. 1000650
Rainwater filter for larger roof areas. The 3P Twinfilter can be installed in a pre-shaft or directly on the wall in frost-free regions. As a rule, standard concrete shafts (Ø 1000 mm) are used. The filter can be delivered to the construction site pre-assembled in the shaft.
Due to its 2-stage cleaning principle, it has a high degree of efficiency independent of the volume flow. Due to the steep position of the filter inserts, the filtered dirt is continuously flushed towards the sewer system. The clean water is collected in a tank and fed into the storage tank.
- Connection capacity: 426 m² roof area with 2x DN 100 and 2x drain DN 100
- Connection capacity: 1254 m² roof area with 2x DN 150 and 2x drain DN 150
- A larger connection area is also possible thanks to a bypass installation
- Rainwater filter according to DIN 1982-2, type C
- Rainwater inlet: 2x DN 100 / DN 150
- Inlet rainwater storage tank: 2x DN 100 / DN 150
- Drain into the sewer: 2x DN 100 / DN 150
- Height difference between inlet and outlet: 500 mm
- Material housing and cascades: Polyethylene
- Filter insert material: Stainless steel 1.4301
- Mesh size: 0.39 x 0.98 mm
3P ECONOMY-SET TF
Art.-Nr. 1000660
3P Twinfilter + 3P calmed inlet DN150 + 3P overflow siphon DN150 with rodent trap
Do you need specialist support or have questions for us?
Ms. Sonja Graf, your competent contact for projects, design, planning support and advice for the applications of the relevant data sheets.
Tel +49 (0) 7334 92460-11
Mail graf@3ptechnik.de
