3P retention &
infiltration filter
with telescopic extension
Article no. 1000626
Rainwater filter with integrated dirt trap for installation in front of the rainwater storage tank. Equipped with a sliding plastic shaft. This allows the telescopic extension to be easily adapted to the height conditions during installation on site. If required, the telescopic extension can also be shortened. It is also possible to stack several extensions on top of each other. The stainless steel dirt collection basket is mounted in the housing so that it can be easily removed using the removal rod.
The 3P retention and infiltration filter is ideal for systems that use the cleaned rainwater for the toilet, washing machine and garden irrigation and where the excess water must be infiltrated on the property because no sewer connection is possible to drain off excess rainwater or the excess water may only be discharged into the sewer via a retention throttle.
- Rainwater filter according to DIN1989-2, type B
- Inlet connection: DN 100
- Drain into the storage tank: DN 100
- Emergency overflow or additional inlet: DN 100
- Height difference between inlet and outlet: 270 mm
- Housing dimensions: Ø 386 x W: 575 x H: 1075 mm
- Filter basket material: Stainless steel 1.4301
- Housing material: Polyethylene
- Mesh size: 0.55 mm
- Basket dimensions: Ø 305 x H: 245 mm
Matching: 3P Retention throttle with overflow siphon 1″ to 4″
Do you need specialist support or have questions for us?
Ms. Sonja Graf, your competent contact for projects, design, planning support and advice for the applications of the relevant data sheets.
Tel +49 (0) 7334 92460-11
Mail graf@3ptechnik.de
