FILTRATION SYSTEM
3P HYDROSYSTEM 400
For metal roof surfaces (copper).
For roof surfaces.
For heavily trafficked traffic areas.
OVERVIEW HYDRSYSTEM / TECHNICAL DATA
metal
FOR METAL ROOF SURFACES (COPPER)
Connectable area:
130 m²
Flow rate:
Q = 1.3 l/s
roof
FOR ROOF SURFACES
Connectable area:
175 m²
Flow rate:
Q = 1.75 l/s
heavy traffic
FOR HEAVILY LOADED TRAFFIC AREAS
Connectable area:
100 m²
Flow rate:
Q = 1 l/s
PLANNING CERTAINTY THROUGH APPROVALS
LFU METAL ROOF
APPROVAL
EXTRACTION VIA
DWA-A 138
EXTRACTION VIA
DWA-A 102
EXTRACTION VIA
DWA-M 153
TENDER SPECIFICATIONS &
DRAWINGS
Request your
tender texts and
drawings!
PLANNING TOOLS
Individual, needs-oriented &
up-to-date information
BIM DATA
Building information modeling
(Building Information Modelling, BIM) for
the provision of 3D and 2D data,
tender texts and other
information for your construction projects.
YOU NEED PROFESSIONAL
SUPPORT OR
HAVE QUESTIONS FOR US?
Jonas Bitterling, M. Eng.
Project Engineer
Tel +49 (0) 7334 92460-12
Mail bitterling@3ptechnik.de
Daniel Betschner,
Master Professional of
Technical Management (CCI)
Project Engineer
Tel +49 (0) 7334 92460-32
Mail betschner@3ptechnik.de
REFERENCES
UNIVERSITY OF GARCHING
ZINC ROOF
FUNCTIONAL PRINCIPLE
①
The stormwater enters the system via the inlet pipe.
②
From there it flows into the hydrodynamic separator.
③
A radial flow regime is generated in the separator. Solids are separated downwards.
④
The solids are collected in a sludge trap under the system, which must be emptied at site-specific intervals.
⑤
The water flows upstream through a filter element.
⑥
The filter cartridge can be easily replaced.
⑦
The treated water is discharged into the stormwater drain or an infiltration system.
HYDROSYSTEM 400
THE SOLUTION FOR SMALL AREAS
The Hydrosystem 400 is the smallest version of the Hydrosystem 1.000.
It is made of plastic and has an internal diameter of 400 mm. It can be installed in a shaft or directly in the storage tank or a soakaway. Special mounting brackets are available for these cases.
A round filter cartridge forms the heart of the system. First, the water flows tangentially via a DN 100 pipe into a hydrodynamic separator. From there, it flows upstream via the central filter element into the drain. A DN 70 emergency overflow ensures that there is no backflow even in the event of heavy rainfall or a blocked filter.
So that the system can be maintained and cleaned by the operator, there is a sludge bucket under the filter that can simply be emptied into the household waste. The filter cartridge can be backwashed with the garden hose. This means that maintenance can be carried out without any problems, even without special knowledge or instruction.
The Hydrosystem 400 has Bavarian state approval for metal roof drains. Two different filter cartridges for copper and zinc roofs are available for this application.
FILTER VARIANTS
heavy traffic
For heavily loaded
traffic areas
metal
For metal roof surfaces
roof
For roof surfaces
Hydrosystem with a diameter of 40 cm.
Sludge bucket for easy maintenance.
All functions identical to Hydrosystem 1.000.
Connectable area: 100 m2 to 170 m² depending on the
soiling and the cleaning target.