3P Volumenfilter VF6
Article no. 1000900
Rainwater filter for larger roof areas. The 3P volume filter VF6 must be installed in a pre-shaft (Ø 1200 mm). Standard concrete shafts are generally used. The filter can be delivered to the construction site pre-assembled in the shaft.
Thanks to its 2-stage cleaning principle (first coarse, then fine cleaning), it has a high degree of efficiency independent of the volume flow. Due to the steep position of the filter insert, the filtered dirt is continuously flushed towards the sewer system, whereby the sewer connection is attached to the manhole. The dirt falls to the bottom of the shaft and is flushed away during heavy rainfall.
- Relative connection capacity according to DIN 18481: up to 2433 m² roof area with a rainfall rate of 300 l/(sxha)
- A larger connection area is also possible thanks to a bypass installation
- Rainwater inlet: 2 x DN 200
- Rainwater storage tank inlet: DN 200
- Drainage system: DN 200
- Height difference between inlet and outlet: 320 mm
- Mesh size: 0.39 x 0.98 mm
3P ECONOMY-SET VF6
Item no. 1000960
3P Volumenfilter VF6 + 3P Beruhigter Zulauf DN200 + 3P Überlaufsiphon DN200 mit Nagetiersperre
Do you need specialist support or have questions for us?
Ms. Sonja Graf, your competent contact for projects, design, planning support and advice for the applications of the relevant data sheets.
Tel +49 (0) 7334 92460-11
Mail graf@3ptechnik.de
