3P Volume filter VF12
Article no. 1000950
Rainwater filter for larger roof areas. The 3P volume filter VF12 must be installed in a pre-shaft (Ø 2000 mm or Ø 2500 mm).
Standard concrete shafts are generally used. The filter can be delivered to the construction site pre-assembled in the shaft.
Thanks to its 2-stage cleaning principle (first coarse, then fine cleaning), it has a high degree of efficiency independent of the volume flow. Due to the steep position of the filter insert, the filtered dirt is continuously flushed towards the sewer system, whereby the sewer connection is attached to the manhole. The dirt falls to the bottom of the shaft and is flushed away during heavy rainfall.
- Relative connection capacity according to DIN 18481: 3933 m²
- Roof area with a rainfall of 300 l/(sxha)
- A larger connection area is also possible thanks to a bypass installation
- Height difference between rainwater inlet and cistern inlet: 600 mm
- DN 300 KG pipe bends are supplied for installation in the concrete shaft
- Rainwater filter according to DIN 1989-2, type C
- Rainwater inlet: 1x DN 300
- Rainwater storage tank inlet: DN 250
- Drain into the sewer: DN 300
- Mesh size: 0.39 x 0.98 mm
3P SPAR-SET VF12
Item no. 1000950
3P volume filter VF12 + 3P calmed inlet DN250 + 3P overflow siphon DN250 with rodent barrier
Do you need specialist support or have questions for us?
Ms. Sonja Graf, your competent contact for projects, design, planning support and advice for the applications of the relevant data sheets.
Tel +49 (0) 7334 92460-11
Mail graf@3ptechnik.de
